Protopasta 1.75mm Silver Smoke PLA 3D Printer Filament - 0.5kg Spool (1.1 lbs)

Usually ships in 5-7 business days. Limited availability. May not be in stock at time of order. No back orders.

Product Image View

Specifications

Proto-pasta's High Temp PLA v2.0 is everything the original kickstarted version should have been. This new formulation is higher performing, more obviously heat treatable, and lower cost. This tough PLA prints with ease but has a potential Heat Deflection Temperature (HDT) of as much as 140C (285F) depending on post-processing. This means parts retain more stiffness and form at higher temperatures (no warping on your sunny car dashboard). For maximum performance your prints should be heat treated (i.e. crystallized) in an oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass: ceramic: or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.

Product Information
SKU
994434
Mfr Part#
HTP21705-SMK
UPC
640970862040
General
Type
Filament
Diameter
1.75mm
Material
PLA
Color
Silver
Plate Temperature
60°C - 70°C
Weight
1.10 lbs. (0.50 kg)
Box Dimensions (WxDxH)
8.00 x 2.00 x 8.00 in. (203.20 x 50.80 x 203.20 mm)
Parts
1 year defective only
$2999