• 10.1 Color LCD Screen
• Automatic Leveling
• Laser-carved Plate
• 223 x 126 x 230mm Print Size

The next-level high-speed printing experience and a gateway 3D printer to an era of ultra-high-speed printing. 60.6% +Light Increase; 20%Release Film Peeling Force Decreased; 77?Optimal Print Temperature; < 1us*Time Deviation; 10% - 40%Speed Increase; 100msModel Graphics Decoding Transmission Time. 2.69s0.1mm Layer Height Print Time; 130mm/hrs0.1mm Layer Height Print Speed. Automatic resin refill; Continuous refilling while printing; One-key recycling of remaining resin; Tool-free, quick installation. Dynamically adjust the resin temperature to ensure optimal printing efficiency and success rate. Photon Mono M7 Pro has a forming size of 223 x 230mm, providing ample space for your creativity. The All-New 14K Optical Sources System LighTurbo 3.0. The COB light source system, combined with Fresnel lenses and front-facing reflectors, Light uniformity on the screen is =90% and achieve model accuracy errors of 0.01-0.05mm. Built-in activated carbon filter and high-performance ventilation motor; VOC content purification efficiency reaches up to 99% in a single operation; Effectively absorbs and filters resin odors near the printing source, providing a cleaner and more reassuring user experience. When the resin level in the vat is below the amount required for slicing printing, users are reminded to refill it promptly. Automatically monitor the number of times the release film is peeled off. Upon reaching 45,000 times, users are reminded to replace it promptly to avoid subsequent printing failures due to decreased release film performance. During the printing process, if the model experiences issues such as layer fractures, bottom detachment, defects, or detachment, printing automatically stops and a pop-up alert is issued, allowing users to adjust the printing task promptly, avoiding wasted resin and time.